ADM810SART-REEL集成電路（IC）的監控器規格書PDF中文資料

ADM810SART-REEL屬于集成電路（IC）的監控器。由亞德諾半導體技術有限公司制造生產的ADM810SART-REEL監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。

GENERAL DESCRIPTION

The ADM803/ADM809/ADM810 supervisory circuits monitor the power supply voltage in microprocessor systems. They provide a reset output during power-up, power-down, and brownout conditions. On power-up, an internal timer holds reset asserted for 240 ms. This holds the microprocessor in a reset state until conditions have stabilized. The reset output remains operational with VCC as low as 1 V. The ADM803 and ADM809 provide an active low reset signal (RESET), whereas the ADM810 provides an active high signal (RESET) output. The ADM809 and ADM810 have push-pull outputs, whereas the ADM803 has an open-drain output, which requires an external pull-up resistor.

FEATURES

Specified over temperature

Low power consumption: 17 μA

Precision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V options

Reset assertion down to 1 V VCC

140 ms minimum power-on reset

Open-drain RESET output (ADM803)

Push-pull RESET output (ADM809)

Push-pull RESET output (ADM810)

SC70 and SOT-23 packages

APPLICATIONS

Microprocessor systems

Computers

Controllers

Intelligent instruments

Automotive systems