ADMV9613中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The ADMV9613 is a complete millimeterwave (mmWave) wireless

connectivity solution in a small printed circuit assembly (PCA)

format. All millimeterwave signals are confined to the printed circuit

assembly, simplifying implementation. Wireless transmission

is achieved using the integrated circularly polarized (CP) omnidirectional

patch antenna array, which enables communication in many

applications, including rotation. Following the antenna array is an

integrated diplexer that provides isolation between the separate

transmit and receive paths on the board, which reduces multipath

distortion. The receive path integrates all components to demodulate

the 59.85 GHz frequency to baseband signals. The flexible

receiver gain control is programmable over a wide range to easily

accommodate the required link budget. The receiver baseband

outputs are dc-coupled and can provide over 500 mV of differential

output signal level. Likewise, the transmit path integrates all components

to modulate input baseband signals to 63.2625 GHz. The

transmitter has programmable gain control to maintain level transmit

power. The transmit baseband inputs are dc-coupled and have

a broad common-mode input range. Synthesizers are integrated to

maintain excellent frequency stability vs. temperature. The simple

amplitude modulation (AM) scheme eliminates the need for external

data converters, allowing for bit rates of greater than 100 Mbps.

On-board power management is integrated to a single 5 V voltage

rail to power the ADMV9613.

FEATURES

? Meets V-band worldwide frequency requirements

? Integrated omnidirectional circularly polarized antenna

? Integrated high band and low band diplexer for improved multipath

distortion

? Full duplex operation

? Simple AM scheme

? Data rate: 100 Mbps

? Ultralow latency

? Short link communication distance: 1 cm to 5 cm

? Receiver frequency: 59.85 GHz

? Transmitter frequency: 63.2625 GHz

? Transmitter gain setting range: ?3 dB to +32 dB

? Integrated transmitter PA power detector

? Receiver gain setting range: ?10 dB to +69 dB

? RF, IF, and BB gain control

? Integrated receiver and transmitter frequency synthesizers

? Integrated reference clock

? On-chip temperature sensors

? DC-coupled baseband input and output

? 3-wire digital SPI

? 34.70 mm × 29.89, 52-terminal printed circuit assembly (PCA)

APPLICATIONS

? 60 GHz short data link for industrial and medical high data rate

applications

? High speed data for rotating applications, such as slip rings and

magnetic resonance imaging systems