ADN4661集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADN4661屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADN4661驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADN4661 is a single, CMOS, low voltage differential signaling (LVDS) line driver offering data rates of over 600 Mbps (300 MHz) and ultra-low power consumption. It features a flow-through pinout for easy PCB layout and separation of input and output signals.

The device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1 mA for driving a transmission medium such as a twisted-pair cable. The transmitted signal develops a differential voltage of typically ±355 mV across a termination resistor at the receiv-ing end, and this is converted back to a TTL/CMOS logic level by a line receiver.

The ADN4661 and a companion LVDS receiver offer a new solution to high speed point-to-point data transmission, and a low power alternative to emitter-coupled logic (ECL) or positive emitter-coupled logic (PECL).

FEATURES

±15 kV ESD protection on output pins

600 Mbps (300 MHz) switching rates

Flow-through pinout simplifies PCB layout

300 ps typical differential skew

700 ps maximum differential skew

1.5 ns maximum propagation delay

3.3 V power supply

±355 mV differential signaling

Low power dissipation: 23 mW typical

Interoperable with existing 5 V LVDS receivers

Conforms to TIA/EIA-644 LVDS standards

Industrial operating temperature range (?40°C to +85°C)

Available in surface-mount (SOIC) package

APPLICATIONS

Backplane data transmission

Cable data transmission

Clock distribution