ADP5587集成電路（IC）的I/O擴展器規格書PDF中文資料

ADP5587屬于集成電路（IC）的I/O擴展器。由亞德諾半導體技術有限公司制造生產的ADP5587I/O 擴展器該系列器件可與微控制器、微處理器或類似器件結合使用，目的是增加可用于連接外設的信號連接數量。典型的工作概念涉及使用串行通信，只需主機設備上的幾根 I/O 線，即可讀/寫擴展器設備上的許多輸入/輸出引腳的狀態。該技術的通信速度不佳，但連通性較高，最適合快速響應不是很關鍵的應用，例如許多人機界面應用。

GENERAL DESCRIPTION

The ADP5587 is an I/O port expander and keypad matrix

designed for QWERTY type phones that require a large keypad

matrix and expanded I/O lines. I/O expander ICs are used in

mobile platforms as a solution to the limited number of GPIOs

available in the main processor. In its small 2 mm × 2 mm package, the ADP5587 contains

enough power to handle all key scanning and decoding and to flag the processor of key presses and releases via the I2C

interface and interrupt. The ADP5587 frees the main micro-

processor from the need to monitor the keypad, thereby

minimizing current drain and increasing processor bandwidth. The ADP5587 is also equipped with a buffer/FIFO and key

event counter to handle and keep track of up to 10 unprocessed key or GPI events with overflow wrap and interrupt capability. The ADP5587 has keypad lock capability with an option to trigger or not trigger an interrupt at key presses and releases.

All communication to the main processor is done using one interrupt line and two I2C-compatible interface lines. The ADP5587 can be configured as a keypad matrix of up to 8 rows × 10 columns (a maximum of 80 keys). When the ADP5587 is used for smaller keypad matrices, unused row and column pins can be reconfigured to act as general-

purpose inputs or outputs. R0 to R7 denote the row pins of the matrix, whereas C0 to C9 denote the column pins. At power-up, all rows and columns default to GPIs and must be programmed to function as part of the keypad matrix or as GPOs. Two options for I2C addresses exist for the LFCSP package to reduce the chance of port contention and allow up to two

ADP5587 ICs to operate on the same I2C bus (see the Ordering Guide).

FEATURES 18-GPIO port expander or 10 × 8 keypad matrix

GPIOs configurable as GPIs, GPOs, and keypad rows or

columns I2C interface with auto-increment

1.65 V to 3.6 V operation

Keypad lock capability

Open-drain interrupt output Key press and key release interrupts

GPI interrupt with level programmability Programmable pull-ups

Key event counter with overflow interrupt

275 μs debounce on the reset line and GPIs 1 μA typical idle current 55 μA typical polling current

4 mm × 4 mm LFCSP package

Small 2 mm x 2 mm WLCSP package, 0.4 mm pitch

Multiple I2C addresses available for the LFCSP package to allow multiple port expanders on the same bus

APPLICATIONS

Keypad and I/O expander designed for QWERTY type phones that require a large keypad matrix