ADR1000AHZ集成電路（IC）的電壓基準規格書PDF中文資料

ADR1000AHZ屬于集成電路（IC）的電壓基準。由亞德諾半導體技術有限公司制造生產的ADR1000AHZ電壓基準產品屬于基準電壓源系列，可通過相對較不穩定的電源提供穩定的電勢，電壓值始終保持恒定，以便在測量、控制和類似應用中用作比較的標準。其功能行為可能與用于大功率調節的線性穩壓器相似，但基準電壓源器件卻不適合用于此類用途。用作比較標準時，若輸出電流容量或?qū)嶋H負載電流增大，其性能通常會降低。

GENERAL DESCRIPTION

The ADR1000 is a 6.62 V, output highly stable, oven-controlled,

buried Zener reference component built on an Analog Devices, Inc.,

proprietary bipolar process and is a pin-compatible replacement for

the LTZ1000. Included on the chip is a buried Zener reference,

a heater resistor for temperature stabilization, and a temperature

sensing transistor. External circuitry is used to set the operating currents

and the temperature of the reference, allowing the maximum

flexibility to achieve maximum long-term stability and minimum noise.

The ADR1000 application circuit can achieve a temperature coefficient

of <0.2 ppm/°C and a long-term drift of 0.5 ppm per year

(typical) after the first 3000 hours when properly implemented with

the recommended external circuitry shown in Figure 9 and with the

recommended layout.

The low long-term drift of the ADR1000 is well suited for any application

that must maintain accuracy over long calibration intervals

or product lifetime. The low thermal drift ensures the output is

constant with temperature variation because the on?chip heater of

the ADR1000 maintains a constant temperature higher than the

expected ambient range.

The ADR1000 is specified for operation over the extended industrial

temperature range of ?40°C to +125°C. To obtain the optimal

thermal drift performance, the temperature set point of the heater

needs to be 10°C higher than the maximum ambient temperature to

provide optimum stability of the buried Zener reference.

The ADR1000 comes packaged in an industry-standard, 8-pin

TO-99 metal can package that is hermetically sealed to resist the

effects of humidity.

FEATURES

? High long-term stability

? 0.5 ppm/year long-term drift, typical (after first 3000 hours)

? Low Zener reference noise: 0.14 ppm p-p (0.9 μV p-p)

? Low temperature coefficient: <0.2 ppm/°C

? On-chip heater and temperature sensor

? Specified for ?40°C to +125°C operation

? Pin‐compatible upgrade to LTZ1000

APPLICATIONS

? High accuracy instrumentation

? Multimeters

? Weigh scales

? Electric balance

? Automatic test equipment

? Metrology equipment

? Standard cells

? Calibrators