ADR395集成電路（IC）的電壓基準規格書PDF中文資料

ADR395屬于集成電路（IC）的電壓基準。由亞德諾半導體技術有限公司制造生產的ADR395電壓基準產品屬于基準電壓源系列，可通過相對較不穩定的電源提供穩定的電勢，電壓值始終保持恒定，以便在測量、控制和類似應用中用作比較的標準。其功能行為可能與用于大功率調節的線性穩壓器相似，但基準電壓源器件卻不適合用于此類用途。用作比較標準時，若輸出電流容量或實際負載電流增大，其性能通常會降低。

GENERAL DESCRIPTION

The AD5762R is a dual, 16-bit, serial input, bipolar voltage output DAC that operates from supply voltages of ±11.4 V to ±16.5 V. Nominal full-scale output range is ±10 V. The AD5762R provides integrated output amplifiers, reference buffers, and proprietary power-up/power-down control circuitry. The device also features a digital input/output port, programmed via the serial interface, and an analog temperature sensor. The device incorporates digital offset and gain adjust registers per channel.

FEATURES

Complete dual, 16-bit, digital-to-analog converter (DAC)

Programmable output range: ±10 V, ±10.2564 V, or ±10.5263 V

±1 LSB maximum INL error, ±1 LSB maximum DNL error

Low noise: 60 nV/√Hz

Settling time: 10 μs maximum

Integrated reference buffers

Internal reference: 10 ppm/°C maximum

On-chip die temperature sensor

Output control during power-up/brownout

Programmable short-circuit protection

Simultaneous updating via LDAC

Asynchronous CLR to zero code

Digital offset and gain adjust

Logic output control pins

DSP-/microcontroller-compatible serial interface

Temperature range: ?40°C to +85°C

Industrial complementary metal-oxide semiconductor

(iCMOS) process technology

APPLICATIONS

Industrial automation

Open-loop/closed-loop servo control

Process control

Data acquisition systems

Automatic test equipment

Automotive test and measurement

High accuracy instrumentation