ADS1015集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

ADS1015屬于集成電路（IC）的模數轉換器（ADC）。由德州儀器制造生產的ADS1015模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

1 Features

? AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? Noise-free resolution: 12 bit

? Wide supply range: 2.0 V to 5.5 V

? Low current consumption: 150 μA

(continuous-conversion mode)

? Programmable data rate:

128 SPS to 3.3 kSPS

? Single-cycle settling

? Internal low-drift voltage reference

? Internal oscillator

? I2C interface: Four pin-selectable addresses

? Family of devices:

– ADS1013-Q1: 1 single-ended (SE) or

differential input (DE)

– ADS1014-Q1: 1 single-ended or differential

input with comparator and PGA

– ADS1015-Q1: 4 single-ended or 2 differential

inputs with comparator and PGA

2 Applications

? Camera modules without processing

? Automotive center information displays

? Automotive cluster displays

? General-purpose voltage and current monitoring

3 Description

The ADS1013-Q1, ADS1014-Q1, and ADS1015-Q1

(ADS101x-Q1) are precision, low-power, 12-bit,

I2C-compatible, analog-to-digital converters (ADCs)

offered in VSSOP-10 and UQFN-10 packages. The

ADS101x-Q1 incorporate a low-drift voltage reference

and an oscillator. The ADS1014-Q1 and ADS1015-

Q1 also incorporate a programmable gain amplifier

(PGA) and a digital comparator. These features, along

with a wide operating supply range, are useful for

power- and space-constrained, sensor measurement

applications.

The ADS101x-Q1 perform conversions at data

rates up to 3300 samples per second (SPS).

The PGA offers input ranges from ±256 mV to

±6.144 V, allowing precise large- and small-signal

measurements. The ADS1015-Q1 features an input

multiplexer (MUX) that allows two differential or four

single-ended input measurements. Use the digital

comparator in the ADS1014-Q1 and ADS1015-Q1 for

under- and overvoltage detection.