ADS131M02QPWRQ1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? 2 simultaneously sampling differential inputs

? Programmable data rate up to 64 kSPS

? Programmable gain up to 128

? Noise performance:

– 102-dB dynamic range at gain = 1, 4 kSPS

– 80-dB dynamic range at gain = 64, 4 kSPS

? Total harmonic distortion: –100 dB

? High-impedance inputs for direct sensor

connection:

– 330-kΩ input impedance for gains of

1, 2, and 4

– ≥1-MΩ input impedance for gains of

8, 16, 32, 64, and 128

? Programmable channel-to-channel phase delay

calibration:

– Resolution = 244 ns, fCLKIN = 8.192 MHz

? Fast start-up: First data within 0.5 ms of supply

ramp

? Integrated negative charge pump allows input

signals below ground

? Crosstalk between channels: –120 dB

? Low-drift internal voltage reference

? Cyclic redundancy check (CRC) on

communications and register map

? Analog and digital supplies: 2.7 V to 3.6 V

? Low-power consumption: 2.3 mW at 3-V AVDD

and DVDD

? Package: 20-pin TSSOP

2 Applications

? Automotive battery management systems (BMS):

– Current-shunt measurements

– Voltage measurements using external resistor

dividers

– Temperature measurements using thermistors

or analog output temperature sensors

? EV charging stations:

– DC e-metering

– AC e-metering

? Energy storage systems (ESS)

3 Description

The ADS131M02-Q1 is a two-channel, simultaneously

sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital

converter (ADC) that offers wide dynamic range

and low power, making the device designed for

automotive battery management systems (BMS).

The ADC inputs can be directly interfaced to

shunt resistors for bidirectional battery-current

measurements, to resistor-divider networks for highvoltage

measurements, or to temperature sensors

(such as thermistors or analog output temperature

sensors).

The individual ADC channels can be independently

configured depending on the sensor input. A lownoise,

programmable gain amplifier (PGA) provides

gains ranging from 1 to 128 to amplify low-level

signals. Additionally, this device integrates channelto-

channel phase calibration and offset and gain

calibration registers to help remove signal-chain

errors.

A low-drift, 1.2-V reference is integrated into the

device, reducing printed circuit board (PCB) area.

Optional cyclic redundancy checks (CRCs) on the

data input, data output, and register map maintain

communication integrity.

The complete analog front-end (AFE) is offered in

a 20-pin TSSOP package and is specified over the

automotive temperature range of –40°C to +125°C.