The ADT7467 dbCOOL controller is a thermal monitor and multiple PWM fan controller for noise-sensitive or power-sensitive applications requiring active system cooling. The ADT7467 can drive a fan using either a low or high frequency drive signal, monitor the temperature of up to two remote sensor diodes plus its own internal temperature, and measure and control the speed of up to four fans so that they operate at the lowest possible speed for minimum acoustic noise.

The automatic fan speed control loop optimizes fan speed for a given temperature. A unique dynamic TMIN control mode enables the system thermals/acoustics to be intelligently managed. The effectiveness of the system’s thermal solution can be monitored using the THERM input. The ADT7467 also provides critical thermal protection to the system using the bidirectional THERM pin as an output to prevent system or component overheating.

Features

● Controls and Monitors up to 4 Fans

● High and Low Frequency Fan Drive Signal

● 1 On-chip and 2 Remote Temperature Sensors

● Series Resistance Cancellation on the Remote Channel

● Extended Temperature Measurement Range, up to 191?C

● Dynamic TMIN Control Mode Intelligently Optimizes System Acoustics

● Automatic Fan Speed Control Mode Manages System Cooling based on Measured Temperature

● Enhanced Acoustic Mode Dramatically Reduces User Perception of Changing Fan Speeds

● Thermal Protection Feature via THERM Output

● Monitors Performance Impact of Intel? Pentium? 4 Processor

● Thermal Control Circuit via THERM Input

● 2-wire, 3-wire, and 4-wire Fan Speed Measurement

● Limit Comparison of All Monitored Values

● Meets SMBus 2.0 Electrical Specifications (Fully SMBus 1.1 Compliant)

● This Device is Pb-Free and is RoHS Compliant*

● Halide-Free Packages are Available

ADT7467ARQZ-REEL屬于集成電路（IC） > 熱管理。安森美半導體公司制造生產的ADT7467ARQZ-REEL熱管理熱管理 IC 是根據溫度控制電路電源的半導體器件。這些 IC 的功能包括風扇控制、硬件監控器、溫度監控系統、熱監控器、熱電偶放大器、熱電偶調節器和溫度計–溫控器。檢測溫度范圍為 -260℃ 至 +1800℃，輸出類型有 I2C、SMBus、低電平有效/高電平有效、模擬電壓、開漏、PWM、SPI、2 線串行和并行–串行。