AI40-N中文資料圖爾克數(shù)據(jù)手冊PDF規(guī)格書

The input module AI40-N is used for the connection of 2-wire transducers (active input

= source mode / transducer passive) or 4-

wire transducers (passive input = sink mode /

transducer active).

The field circuits are galvanically isolated from

each other.

HART-compatible transducers can be connected to the module. The field device can

thus be parametrized directly at the terminals

on the DIN rail with a licensed modem. Additional impedance in the circuit is not necessary.

The measuring range is digitized in the scope

of 0…21 mA. For clear reading, the digitized

value is displayed in a range of 0…21000 (independent of the parametrized measuring

range) and transmitted to the host system.

■ Input module for the connection of passive

transmitters (active inputs) or active transmitters (passive inputs).

■ Complete galvanic isolation