AK8963N傳感器變送器的磁性傳感器-線性羅盤（IC）規格書PDF中文資料

AK8963N屬于傳感器變送器的磁性傳感器-線性羅盤（IC）。由旭化成微電子株式會社制造生產的AK8963N磁性傳感器 - 線性，羅盤（IC）該系列產品可用于將磁場強度作為一個可變數量進行測量，而相比之下，類似產品僅檢測是否存在強度超過某個限值的磁場。常見的應用包括測量地球磁場，以類似于傳統羅盤的方式進行定向，市面上的一些器件允許以相對于磁場的物理方向直接讀取測量值。

Overview

AK8963 is 3-axis electronic compass IC with high sensitive Hall sensor technology.

Small package of AK8963 incorporates magnetic sensors for detecting terrestrial magnetism in the X-axis, Y-axis, and Z-axis, a sensor driving circuit, signal amplifier chain, and an arithmetic circuit for processing the signal from each sensor. Self test function is also incorporated. From its compact foot print and thin package feature, it is suitable for map heading up purpose in GPS-equipped cell phone to realize pedestrian navigation function.

Features

A 3-axis electronic compass IC with high sensitive Hall sensor technology.

Best adapted to pedestrian city navigation use for cell phone and other portable appliance.

Functions:

? 3-axis magnetometer device suitable for compass application

? Built-in A to D Converter for magnetometer data out

? 14-/16-bit selectable data out for each 3 axis magnetic components

- Sensitivity:

0.6 μT/LSB typ. (14-bit)

0.15μT/LSB typ. (16-bit)

? Serial interface

- I2C bus interface.

Standard mode and Fast mode compliant with Philips I2C specification Ver.2.1

- 4-wire SPI

? Operation modes:

Power-down, Single measurement, Continuous measurement,

External trigger measurement, Self test and Fuse ROM access.

? DRDY function for measurement data ready

? Magnetic sensor overflow monitor function

? Built-in oscillator for internal clock source

? Power on Reset circuit

? Self test function with built-in internal magnetic source

Operating temperatures:

? -30°C to +85°C

Operating supply voltage:

? Analog power supply +2.4V to +3.6V

? Digital Interface supply +1.65V to analog power supply voltage.

Current consumption:

? Power-down: 3 μA typ.

? Measurement:

- Average power consumption at 8 Hz repetition rate: 280μA typ.

Package:

AK8963C 14-pin WL-CSP (BGA): 1.6 mm × 1.6 mm × 0.5 mm (typ.)

AK8963N 16-pin QFN package: 3.0 mm × 3.0 mm × 0.75 mm (typ.)