ALD910026SALI分立半導(dǎo)體產(chǎn)品的晶體管-特殊用途規(guī)格書PDF中文資料

GENERAL DESCRIPTION

The ALD810026/ALD910026 are members of the ALD8100xx

(quad) and ALD9100xx (dual) family of Supercapacitor Auto Balancing

MOSFETs, or SAB? MOSFETs. SAB MOSFETs are built

with production proven EPAD? technology and are designed to address

voltage and leakage-current balancing of supercapacitors

connected in series. Supercapacitors, also known as ultracapacitors

or supercaps, connected in series can be leakage-current balanced

by using a combination of one or more devices connected across

each supercapacitor stack to prevent over-voltages.

The ALD810026 offers a set of unique, precise operating voltage

and current characteristics for each of four SAB MOSFET devices,

as shown in its Operating Electrical Characteristics table. It can be

used to balance up to four supercapacitors connected in series.

The ALD910026 has its own set of unique precision Operating Electrical

Characteristics for each of its two SAB MOSFET devices,

suitable for up to two series-connected supercapacitors.

Each SAB MOSFET features a precision gate threshold voltage in

the Vt mode, which is 2.60V when the gate-drain source terminals

(VGS = VDS) are connected together at a drain-source current of

IDS(ON) = 1μA. In this mode, input voltage VIN = VGS = VDS. Different

VIN produces an Output Current IOUT = IDS(ON) characteristic

and results in an effective variable resistor that varies in value

exponentially with VIN. This VIN, when connected across each

supercapacitor in a series, balances each supercapacitor to within

its voltage and current limits.

When VIN = 2.60V is applied to an ALD810026/ALD910026, its

IOUT is 1μA. For a 100mV increase in VIN, to 2.70V, IOUT increases

by about tenfold. For an additional increase in VIN to 2.82V for the

ALD910026 (2.84V for the ALD810026), IOUT increases one hundredfold,

to 100μA. Conversely, for a 100mV decrease in VIN to

2.50V, IOUT decreases to one tenth of its previous value, to 0.1μA.

Another 100mV decrease in input voltage would reduce IOUT to

0.01μA. Hence, when an ALD810026/ALD910026 SAB MOSFET

is connected across a supercapacitor that charges to less than

2.40V, it would dissipate essentially no power.

(Continued on next page)

FEATURES & BENEFITS

? Simple and economical to use

? Precision factory trimmed

? Automatically regulates and balances leakage currents

? Effective for supercapacitor charge-balancing

? Balances up to 4 supercaps with a single IC package

? Balances 2-cell, 3-cell, 4-cell series-connected supercaps

? Scalable to larger supercap stacks and arrays

? Near zero additional leakage currents

? Zero leakage at 0.3V below rated voltages

? Balances series and/or parallel-connected supercaps

? Leakage currents are exponential function of cell voltages

? Active current ranges from 1000μA

? Always active, always fast response time

? Minimizes leakage currents and power dissipation

VAPPLICATIONS

? Series-connected supercapacitor cell leakage balancing

? Energy harvesting

? Long term backup battery with supercapacitor outputs

? Zero-power voltage divider at selected voltages

? Matched current mirrors and current sources

? Zero-power mode maximum voltage limiter

? Scaled supercapacitor stacks and arrays