ANX7447中文資料硅谷數模數據手冊PDF規格書

Features

TCPC-compliant hardware interface

Supports DFP and DRP modes for Host-only or Dual- Role applications

Integrated VCONN FETs

Built-in 10-bit ADC to monitor VBUS voltage and current

Integrated Billboard

Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity

Serial and debug interfaces

- I2C Master/Slave interface

Industry standard compatibility

- USB Type-C r1.2 specification

- USB Power Delivery v3.0 r1.0 specification

- DisplayPort 1.4 specification

- DisplayPort Alternate Mode over USB Type-C r1.1 specification

- Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification

Low-power design

- Single supply at 3.3V

- Dedicated supply power pin for flexible I/O power – 1.8V or 3.3V

- Ultra-low power consumption (typical 77uW) in standby mode

On-chip microcontroller with reprogrammable memory for USB-PD v3.0 engine

- 64K bytes SRAM for firmware execution

- 128K bytes Flash for firmware storage

- PDFU function for firmware updating

Dead battery detection support

Package offered: 28-pin QFN, 4mm x 4mm, 0.90mm Z-height, pin-pitch: 0.4mm

Applications

Dongles, docks, HDTV, monitors, and projectors