Description

The AT17C002 and AT17LV002 (high-density AT17 Series) FPGA Configuration EEPROMs (Configurators) provide an easy-to-use, cost-effective configuration memory for programming Field Programmable Gate Arrays. The AT17 Series is packaged in the popular 8-lead LAP, 20-lead PLCC, 44-lead PLCC and the 44-lead TQFP. The AT17 Series family uses a simple serial-access procedure to configure one or more FPGA devices. The user can select the polarity of the reset function by programming four EEPROM bytes. These devices support a write protection mode and a systemfriendly READY pin, which signifies a “good” power level to the FPGA and can be used to ensure reliable system power-up.

Features

? EE Reprogrammable 2,097,152 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs)

? In-System Programmable via 2-wire Bus

? Simple Interface to SRAM FPGAs

? Compatible with Atmel AT6000, AT40K and AT94K Devices, Altera FLEX?, APEX? Devices, Lucent ORCA? FPGAs, Xilinx XC3000?, XC4000?, XC5200?, Spartan?, Virtex? FPGAs

? Cascadable Read Back to Support Additional Configurators or Higher-density Arrays

? Low-power CMOS EEPROM Process

? Programmable Reset Polarity

? Available in 6 mm x 6 mm x 1 mm 8-lead LAP (Pin-compatible with 8-lead SOIC/VOIC Packages), 20-lead PLCC, 44-lead PLCC and 44-lead TQFP Packages (Pin-compatible Across Product Family)

? Emulation of Atmel’s AT24CXXX Serial EEPROMs

? Available in 3.3V ± 10 LV and 5V ± 5 C Versions

? System-friendly READY Pin

? Low-power Standby Mode

? Replacement for AT17C/LV020