AT27LV020A-12TI集成電路（IC）的存儲器規(guī)格書PDF中文資料

Description

The AT27LV020A is a high-performance, low-power, low-voltage 2,097,152 bit one time programmable read-only memory (OTP EPROM) organized as 256K by 8 bits. It requires only one supply in the range of 3.0 to 3.6V in normal read mode operation, making it ideal for fast, portable systems using battery power.

Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3V supply. At VCC = 3.0V, any byte can be accessed in less than 120 ns. With a typical power dissipation of only 18 mW at 5 MHz and VCC = 3.3V, the AT27LV020A consumes less than one fifth the power of a standard 5V EPROM. Standby mode supply current is typically less than 1 μA at 3.3V.

The AT27LV020A is available in industry-standard JEDEC approved one-time programmable (OTP) plastic PLCC, TSOP, and VSOP. All devices feature two-line control (CE, OE) to give designers the flexibility to prevent bus contention.

The AT27LV020A operating with VCC at 3.0V produces TTL level outputs that are compatible with standard TTL logic devices operating at VCC = 5.0V. The device is also capable of standard 5-volt operation making it ideally suited for dual supply range systems or card products that are pluggable in both 3-volt and 5-volt hosts.

Atmels AT27LV020A has additional features to ensure high quality and efficient production use. The Rapid Programming Algorithm reduces the time required to program the part and guarantees reliable programming. Programming time is typically only 100 μs/byte. The Integrated Product Identification Code electronically identifies the device and manufacturer. This feature is used by industry standard programming equipment to select the proper programming algorithms and voltages. The AT27LV020A programs exactly the same way as a standard 5V AT27C020 and uses the same programming equipment.

Features

? Fast Read Access Time – 120 ns, see AT27BV020 for Faster Speeds

? Dual Voltage Range Operation

– Low Voltage Power Supply Range, 3.0V to 3.6V

or Standard 5V ± 10 Supply Range

? Compatible with JEDEC Standard AT27C020

? Low Power CMOS Operation

– 20 μA Max (Less than 1 μA Typical) Standby for VCC = 3.6V

– 29 mW Max Active at 5 MHz for VCC = 3.6V

? JEDEC Standard Packages

– 32-lead PLCC

– 32-lead TSOP

– 32-lead VSOP

? High Reliability CMOS Technology

– 2,000V ESD Protection

– 200 mA Latchup Immunity

? Rapid Programming Algorithm – 100 μs/Byte (Typical)

? Two-line Control

? CMOS and TTL Compatible Inputs and Outputs

– JEDEC Standard for LVTTL

? Integrated Product Identification Code

? Industrial Temperature Range

? Green (Pb/Halide-free) Packaging Option