AT6003A-2AI中文資料愛特梅爾數據手冊PDF規(guī)格書

Description

AT6000 Series SRAM-based Field Programmable Gate Arrays (FPGAs) are ideal for use as reconfigurable coprocessors and implementing compute-intensive logic.

Supporting system speeds greater than 100 MHz and using a typical operating current of 15 to 170 mA, AT6000 Series devices are ideal for high-speed, compute-intensive designs. These FPGAs are designed to implement Cache Logic?, which provides the user with the ability to implement adaptive hardware and perform hardware acceleration.

The patented AT6000 Series architecture employs a symmetrical grid of small yet powerful cells connected to a flexible busing network. Independently controlled clocks and resets govern every column of cells. The array is surrounded by programmable I/O.

Devices range in size from 4,000 to 30,000 usable gates, and 1024 to 6400 registers. Pin locations are consistent throughout the AT6000 Series for easy design migration. High-I/O versions are available for the lower gate count devices.

Features

? High-performance

– System Speeds > 100 MHz

– Flip-flop Toggle Rates > 250 MHz

– 1.2 ns/1.5 ns Input Delay

– 3.0 ns/6.0 ns Output Delay

? Up to 204 User I/Os

? Thousands of Registers

? Cache Logic? Design

– Complete/Partial In-System Reconfiguration

– No Loss of Data or Machine State

– Adaptive Hardware

? Low Voltage and Standard Voltage Operation

– 5.0 (VCC = 4.75V to 5.25V)

– 3.3 (VCC = 3.0V to 3.6V)

? Automatic Component Generators

– Reusable Custom Hard Macro Functions

? Very Low-power Consumption

– Standby Current of 500 μA/ 200 μA

– Typical Operating Current of 15 to 170 mA

? Programmable Clock Options

– Independently Controlled Column Clocks

– Independently Controlled Column Resets

– Clock Skew Less Than 1 ns Across Chip

? Independently Configurable I/O (PCI Compatible)

– TTL/CMOS Input Thresholds

– Open Collector/Tristate Outputs

– Programmable Slew-rate Control

– I/O Drive of 16 mA (combinable to 64 mA)

? Easy Migration to Atmel Gate Arrays for High Volume Production