AZ1013-04F電路保護的TVS-二極管規格書PDF中文資料

AZ1013-04F屬于電路保護的TVS-二極管。由Amazing Tech Co., Ltd制造生產的AZ1013-04FTVS - 二極管TVS 二極管是一種半導體器件，可用于限制或阻止特定電壓電平的浪涌。該系列產品使用二極管（只能單向?qū)щ姷脑骷┻M(jìn)行設計。TVS 是 Transient Voltage Suppression/Suppressor（瞬態電壓抑制/抑制器）的首字母縮寫。類型包括轉向（軌至軌）或齊納，具有單向通道、雙向通道、電壓 – 反關態、電壓 – 擊穿、電壓 – 箝位、電流 – 峰值脈沖、功率 – 峰值脈沖和電源線路保護等特征。

Features

ESD Protect for Low-Voltage Differential

Signaling (LVDS) channels

Protects four I/O lines

Provide ESD protection for each line to

IEC 61000-4-2 (ESD) ±30kV (air), ±25kV (contact)

IEC 61000-4-4 (EFT) 80A (5/50ns)

IEC 61000-4-5 (Lightning) 15A (8/20μs)

For operating voltage of 3.3V and below

Low capacitance : 2.0pF typical

Fast turn-on and Low clamping voltage

Array of ESD rated diodes with internal

equivalent TVS (Transient Voltage

Suppression) diode

Solid-state silicon-avalanche and active circuit

triggering technology

Green part

Applications

LVDS Interface

USB2.0 Data lines protection

Control Signal Lines Protection

SIM ports

Monitors and Flat Panel Displays

Notebook and PC Computers

Ethernet port: 10/100/1000 Mb/s

Consumer Electronics

Set Top Box

Description

AZ1013-04F is a high performance design which

includes surge rated diode arrays to protect high

speed data interfaces. The AZ1013-04F has

been specifically designed to protect sensitive

components, which are connected to data and

transmission lines, from over-voltage caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), and Lightning.

AZ1013-04F is a unique design which includes

surge rated, low capacitance steering diodes and

a unique design of clamping cell which is an

equivalent TVS diode in a single package. During

transient conditions, the steering diodes direct

the transient to either the internal ESD line or to

ground line. The internal unique design of

clamping cell prevents over-voltage on the

internal ESD line and on the I/O line, which is

protecting any downstream components.

AZ1013-04F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).