AZ176S-04F電路保護的TVS-二極管規格書PDF中文資料

AZ176S-04F屬于電路保護的TVS-二極管。由Amazing Tech Co., Ltd制造生產的AZ176S-04FTVS - 二極管TVS 二極管是一種半導體器件，可用于限制或阻止特定電壓電平的浪涌。該系列產品使用二極管（只能單向?qū)щ姷脑骷┻M行設計。TVS 是 Transient Voltage Suppression/Suppressor（瞬態電壓抑制/抑制器）的首字母縮寫。類型包括轉向（軌至軌）或齊納，具有單向通道、雙向通道、電壓 – 反關態、電壓 – 擊穿、電壓 – 箝位、電流 – 峰值脈沖、功率 – 峰值脈沖和電源線路保護等特征。

Features

? ESD protection for super speed differential

signaling (above 10Gb/s) channels

? Protects four I/O lines

? Provide transient protection for each line to

IEC 61000-4-2 (ESD) ±15kV (air), ±14kV (contact)

IEC 61000-4-4 (EFT) 30A (5/50ns)

IEC 61000-4-5 (Lightning) 4A (8/20ms)

? For low operating voltage of 1.5V and below

? Ultra-low capacitance: 0.29pF typical

? Fast turn-on and ultra-low clamping voltage

? Array of ESD rated diodes with internal

equivalent TVS (Transient Voltage

Suppression) diode

? Solid-state silicon-avalanche and active circuit

triggering technology

? Green part

Applications

? USB3.1 and USB3.0 interfaces

? Thunderbolt interface

? DisplayPort interface

? SATA and eSATA interface

? V-By-One interface

? Consumer electronics

Description

AZ176S-04F is a design which includes ESD

rated diode arrays to protect high-speed data

interfaces. The AZ176S-04F has been

specifically designed to protect sensitive

components which are connected to data and

transmission lines from over-voltage caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ176S-04F is a unique design which includes

ESD rated, ultra-low capacitance steering diodes

and unique design of clamping cell which is an

equivalent TVS diode in a single package. During

transient conditions, the steering diodes direct

the transient to either the internal ESD line or to

ground line. The internal unique design of

clamping cell prevents over-voltage on the

internal ESD line and on the I/O line, which is

protecting any downstream components.

AZ176S-04F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).