AZ2025-01H.R7G中文資料晶焱科技數(shù)據(jù)手冊PDF規(guī)格書

Features

ESD Protection for 1 Line with Bi-directional.

Provide ESD protection for the protected line to

IEC 61000-4-2 (ESD) ±20kV (air), ±12kV (contact)

IEC 61000-4-4 (EFT) 40A (5/50ns)

IEC 61000-4-5 (Lightning) 7A (8/20μs)

Cable Discharge Event (CDE)

Ultra-small SOD-523 package saves board

space.

Protect one I/O line or one power line

Fast turn-on and Low clamping voltage

For low operating voltage applications: 5V,

4.2V, 3.3V, 2.5V

Solid-state silicon-avalanche and active circuit

triggering technology

Applications

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Latchup Protection

Description

AZ2025-01H is a design which includes a

bi-directional surge rated clamping cell to protect

one power line, or one control line, or one low

speed data line in an electronic systems. The

AZ2025-01H has been specifically designed to

protect sensitive components which are

connected to power and control lines from

over-voltage damage and latch-up caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ2025-01H is a unique design which includes

proprietary clamping cells in a single package.

During transient conditions, the proprietary

clamping cells prevent over-voltage on the power

line or control/data lines, protecting any

downstream components.

AZ2025-01H is bi-directional and may be used

on lines where the signal swings above and

below ground.

AZ2025-01H may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).