B126-2A0計算機設備的配件規(guī)格書PDF中文資料

Description

The B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite's B126-002 or B126-

004 transmitter to extend an HDMI signal and split it to two projectors, monitors or televisions. It's ideal for

digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications

where the video source is located farther than conventional cables allow or that require multiple displays

connected to one source.

The receiver uses HDMI cable (see Tripp Lite's P568-Series) to connect to the monitors and Cat5e/6

cable to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24

AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

The B126-2A0 can extend a 1080i (60 Hz) signal up to 200-ft. (60.96 m), a 1080p (60 Hz) signal up to

150-ft. (45.72 m) and a 3D signal up to 125-ft. (38.1 m). You can connect up to three B126-110 remote

repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700-ft. (213.36 m)

(1080i), 500-ft. (152.4 m) (1080p) or 400-ft. (121.92 m) (3D).

In addition to crystal-clear video, the B126-2A0 delivers full, rich stereo and 7.1-channel surround sound

(multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization

control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per

channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall,

rack or pole using the included hardware.

Features

Extends High-Definition Signals

l Works in tandem with Tripp Lite's B126-002 or B126-004 transmitter unit

Extends a 1080i (60 Hz) signal up to 200-ft. (60.96 m), a 1080p (60 Hz) signal up to 150-ft. (45.72 m)

and a 3D signal up to 125-ft. (38.1 m)

Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700-ft. (213.36

m) (1080i), 500-ft. (152.4 m) (1080p) and 400-ft. (121.92 m) (3D)

Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire

Cat5e/6 cable, such as Tripp Lite's N202-Series)