C8051F065中文資料SILABS數(shù)據(jù)手冊PDF規(guī)格書

1.1.3. Additional Features

The C8051F06x MCU family includes several key enhancements to the CIP-51 core and peripherals to

improve overall performance and ease of use in end applications.

The extended interrupt handler provides 22 interrupt sources into the CIP-51, allowing the numerous analog and digital peripherals to interrupt the controller. An interrupt driven system requires less intervention by the MCU, giving it more effective throughput. The extra interrupt sources are very useful when building multi-tasking, real-time systems.

There are up to seven reset sources for the MCU: an on-board VDD monitor, a Watchdog Timer, a missing

clock detector, a voltage level detection from Comparator0, a forced software reset, the CNVSTR2 input

pin, and the /RST pin. The /RST pin is bi-directional, accommodating an external reset, or allowing the

internally generated POR to be output on the /RST pin. Each reset source except for the VDD monitor and

Reset Input pin may be disabled by the user in software; the VDD monitor is enabled/disabled via the

MONEN pin. The Watchdog Timer may be permanently enabled in software after a power-on reset during

MCU initialization.

The MCU has an internal, stand alone clock generator which is used by default as the system clock after

any reset. If desired, the clock source may be switched on the fly to the external oscillator, which can use a crystal, ceramic resonator, capacitor, RC, or external clock source to generate the system clock. This can be extremely useful in low power applications, allowing the MCU to run from a slow (power saving) external crystal source, while periodically switching to the fast (up to 25 MHz) internal oscillator as needed.