1 Features

? AEC-Q100 qualified for automotive applications

? Fully configurable dual-rail design allows each port

to operate from 1.1 V to 5.5 V

? Robust, glitch-free power supply sequencing

? Up to 420-Mbps support for 3.3 V to 5.0 V

? Schmitt-trigger inputs allow for slow or noisy inputs

? I/Os with integrated dynamic pull-down resistors

help reduce external component count

? Control inputs with integrated static pull-down

resistors allow for floating control inputs

? High drive strength (up to 32 mA at 5 V)

? Low power consumption:

– 4-μA maximum (25°C)

– 12-μA maximum (–40°C to 125°C)

? VCC isolation and VCC disconnect (Ioff-float) feature:

– If either VCC supply is < 100 mV or

disconnected, all I/Os get pulled-down and then

become high-impedance

? Ioff supports partial-power-down mode operation

? Compatible with LVC family level shifters

? Control logic (DIR and OE) are referenced to VCCA

? Operating temperature from –40°C to +125°C

? Latch-up performance exceeds 100 mA per JESD

78, Class II

? ESD protection exceeds JESD 22

– 4000-V Human-Body Model

– 1000-V Charged-Device Model

2 Applications

? Eliminate slow or noisy input signals

? Driving indicator LEDs or buzzers

? Debouncing a mechanical switch

? Infotainment head unit

? ADAS fusion

3 Description

The SN74LXC8T245-Q1 is an 8-bit, dual-supply

noninverting bidirectional voltage level translation

device. Ax pins and control pins (DIR and OE) are

referenced to VCCA logic levels, and Bx pins are

referenced to VCCB logic levels. The A port is able to

accept I/O voltages ranging from 1.1 V to 5.5 V, while

the B port can accept I/O voltages from 1.1 V to 5.5

V. A high on DIR allows data transmission from A to

B and a low on DIR allows data transmission from B

to A when OE is set to low. When OE is set to high,

both Ax and Bx pins are in the high-impedance state.

See Device Functional Modes for a summary of the

operation of the control logic.

CLXC8T245QRHLRQ1屬于集成電路（IC） > 轉換器，電平移位器。美國德州儀器公司制造生產的CLXC8T245QRHLRQ1轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。