CS5560集成電路（IC）的模數轉換器（ADC）規(guī)格書PDF中文資料

CS5560屬于集成電路（IC）的模數轉換器（ADC）。由凌云邏輯制造生產的CS5560模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

General Description

The CS5560 is a single-channel, 24-bit analog-to-digital converter capable of 50 kSps conversion rate. The input accepts a fully differential analog input signal. On-chip buffers provide high input impedance for both the AIN inputs and the VREF+ input. This significantly reduces the drive requirements of signal sources and reduces errors due to source impedances. The CS5560 is a delta-sigma converter capable of switching multiple input channels at a high rate with no loss in throughput. The ADC uses a low-latency digital filter architecture.

Features

? Differential Analog Input

? On-chip Buffers for High Input Impedance

? Conversion Time = 20 μS

? Settles in One Conversion

? Linearity Error = 0.0007

? Signal-to-Noise = 110 dB

? 24 Bits, No Missing Codes

? Self-calibration:

- Maintains accuracy over time & temperature.

? Simple three/four-wire serial interface

? Power Supply Configurations:

- Analog: +5V/GND; IO: +1.8V to +3.3V

- Analog: ±2.5V; IO: +1.8V to +3.3V

? Power Consumption:

- ADC Input Buffers On: 85 mW

- ADC Input Buffers Off: 70 mW