CS8147YT5集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

CS8147YT5屬于集成電路（IC）的線性+開關穩壓器。由安森美半導體公司制造生產的CS8147YT5穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

The CS8147 is a 10 V/5.0 V dual output linear regulator. The 10V ±5.0 output sources 500 mA and the 5.0 V ±3 output sources 70 mA. The secondary output is inherently stable and does not require an external capacitor.

The on board ENABLE function controls the regulator’s two outputs. When ENABLE is high, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 70 μA of quiescent current.

The regulator is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions.

The CS8147 is packaged in a 5 lead TO–220 with copper tab. The copper tab can be connected to a heat sink if necessary.

Features

? Two Regulated Outputs

– 10 V ±5.0; 500 mA

– 5.0 V ±3.0; 70 mA

? 70 μA SLEEP Mode Current

? Inherently Stable Secondary Output (No Output Capacitor Required)

? Fault Protection

– Overvoltage Shutdown

– Reverse Battery

– 60 V Peak Transient

– –50 V Reverse Transient

– Short Circuit

– Thermal Shutdown

? CMOS Compatible ENABLE Input with Low (IOUT(max)) Input Current