CXB1818Q中文資料索尼數(shù)據(jù)手冊PDF規(guī)格書

Description

The CXB1818Q is a high-speed monolithic Laser Diode Driver/Current Switch with ECL/PECL input level. Open collector outputs are provided at the output pins (Q, QBX) and have the capacity of driving modulation current of 50mAp-p at a maximum data rate of 622Mbps. Along with the modulation current generator there is the laser diode bias current generator which has capacity of sourcing up to 60mA (Bias). The laser diode bias current can be controlled by either a voltage or current into the bias adjust pin (BiasAdj) and the bias set pin (SBias), depending on how these pins are configured. Control of the bias current is achieved through the APC (Automatic Power Control) circuit. In order to avoid having a large current go through the laser diode, this IC also provides an Activity detector function for laser protection. The Activity detector circuit detects data edge transitions and if no data transition occurs after a certain period, then both the modulation and bias currents are shutdown. The bias currents are shut it down by in order to pull down the output voltage of APC OP.Amp.

Features

? Maximum data rate (NRZ): 622Mbps

? Alarm and Shutdown function

? DFF for input signal correction

? Input signal Duty cycle correction

? Automatic Power Control (APC) for bias current

? Activity detector function for laser protection

? Alarm signal mask function during shutdown

? Differential PECL inputs or AC coupled inputs

Applications

? SONET/SDH: 622Mbps

? Fibre channel: 531Mbps