D2050中文資料GMI數(shù)據(jù)手冊PDF規(guī)格書

General description:

D2000M series Intrinsically Safe Multiplexing System consists of one to four

Analog-Temperature Multiplexer units model D2010M, up to twelve Expander units

model D2011M, or up to four Digital Multiplexer units model D2030M, mounted in

Hazardous Area/Hazardous Locations Zone 1-2, Gas Group IIC-IIB-IIA T4 or

Class I, Division 1-2, Group A, B, C, D T4 and connected via a single/redundant 2 wires

data communication/supply line to a Modbus Gateway unit model D2050M,

mounted in Safe Area/Non Hazardous Locations and connected to a PLC, DCS or PC.

The Gateway D2050M unit, mounted in Safe Area/Non Hazardous Locations, provides

intrinsically safe protection to the 2 wires communication link, and supplies power to

Analog-Temperature Multiplexer D2010M and Digital Multiplexer D2030M units,

installed in Hazardous Area/Hazardous Locations, close to input sensors, for data

acquisition and connects the field multiplexers to a Safe Area/Non Hazardous Locations

PLC, DCS or other devices, saving wiring cables and costs.

The unit is primarily intended to interface field multiplexer with the PLC, DCS systems

via Modbus serial lines with redundant communication.

Units D2010M, D2011M and D2030M scan all channels and store all data in a memory

buffer, where they can be rapidly accessed by the Modbus Gateway unit D2050M.

Each multiplexer unit D2010M accepts directly up to 16 input channels and, by adding

from one to three D2011M, is expandable to 64 channels. Four D2010M units,

connected to twelve D2011M expanders, achieve 256 inputs via one Modbus Gateway

D2050M. D2030M unit accepts up to 32 digital input channels and up to four D2030M

units (128 channels) can be connected to the D2050M Gateway.

One D2050M unit can support up to 256 analog input channels from D2010M, D2011M

or 128 digital channels from D2030M unit.

Redundant communication is obtained by dual data/supply interface line.

Safety parameters mantain compatibility with Gas Group IIC or Gas Group A and B,

even in redundant mode.

All parameters are software configurable by serial commands. Functions and serial

commands for RS-232 and RS-485 protocols are provided in the instruction manual.

Features:

? Intrinsically Safe Associated Apparatus for installation in

Safe Area/Non Hazardous Locations to supply Multiplexer D2010M,

D2011M, D2030M installed in Zone 1, 2 Gas Group IIC, IIB, IIA T4

or Class I, Division 1, 2 Groups A, B, C, D, Temperature Code T4 and

Class I, Zone 1, 2 Groups IIC, IIB, IIA, Temperature Code T4

Hazardous Area/Hazardous Location.

? Universal inputs (mV, TC, RTD, contact or proximity detector) via

D2010M, D2011M, D2030M unit from Zone 0, 1, 2 or

Class I, II, III, Division 1, 2, Groups A, B, C, D, E, F, G, and

Class I, Zone 0, 1, 2 Groups IIC, IIB, IIA Hazardous Location.

? Expandability up to 256 analog/128 digital channels per system and

31 systems on a single Modbus serial link for up to 7936/3968 channels.

? Redundant field lines for communication/supply.

? Modbus interface RTU protocol on redundant RS-485.

? RS-232 port for system configuration.

? Three port isolation, Input/Output/Supply.

? EMC Compatibility to EN61000-6-2, EN61000-6-4.

? ATEX, FM & FM-C, Russian and Ukrainian Certifications.

? High reliability, SMD components.

? Configurable by SWC2090 software (free of charge) or user software.

? Modbus output allows savings on PLC/DCS I/O cards cost.

? Lower cables, installation and maintenance costs.

? Simplified installation using standard DIN Rail mounting units.

? Repeat Hazardous Area/Hazardous Locations input contact or

proximity detector in Safe Area/Non Hazardous Locations via

D2052M unit (relay output) or via D2053M unit (transistor output).