DA16200RF/IF射頻/中頻RFID的射頻收發(fā)器IC規(guī)格書PDF中文資料

General Description

The DA16200 is a highly integrated ultra-low power Wi-Fi system on a chip (SoC), which contains an

802.11b/g/n radio (PHY), a baseband processor, a media access controller (MAC), on-chip memory,

and a host networking application processor, all on a single silicon die.

The SoC enables full offload capabilities, running the entire networking stack on chip so that no

external network processor, CPU, or microcontroller is required, while many other SoCs optionally

use a microcontroller.

DA16200 is a synthesis of breakthrough ultra-low power technologies that enables extremely low

power operation in the SoC. DA16200 shuts down every micro element of the chip that is not in use,

which allows a near zero level of power consumption when not actively transmitting or receiving data.

Such low power operation can extend the battery life up to a year or more depending on the

application. DA16200 also enables ultra-low power transmitting and receiving modes when the SoC

needs to be awake to exchange information with other devices. Advanced algorithms enable staying

asleep until the exact moment required to wake up to transmit or receive.

The SoC is built from the ground up for the Internet of Things (IoT) and is ideal for door locks,

thermostats, sensors, pet trackers, asset trackers, sprinkler systems, connected lighting, video

cameras, video doorbells, wearables, and other IoT devices.

Key Features

■ Highly integrated ultra-low power Wi-Fi?

system on chip

■ Full offload: SoC runs full networking OS and

TCP/IP stack

■ Wi-Fi processor

□ IEEE 802.11b/g/n, 1×1, 20 MHz channel

bandwidth, 2.4 GHz

□ IEEE 802.11s Wi-Fi mesh

□ On-chip PA, LNA, and RF switch

□ Wi-Fi security: WPA/WPA2-

Enterprise/Personal, WPA2 SI, WPA3

SAE, and OWE

□ Vendor EAP types: EAPTTLS/MSCHAPv2, PEAPv0/EAPMSCHAPv2, PEAPv1, EAP-FAST, and

EAP-TLS

□ Operating modes: Station, SoftAP, and

Wi-Fi Direct? Modes (GO, GC, GO fixed)

□ WPS-PIN/PBC for easy Wi-Fi provisioning

□ Connection manager for autonomous and

fast Wi-Fi connections

□ Bluetooth coexistence

□ Antenna switching diversity

■ Built-in 4-channel auxiliary ADC for sensor

interfaces

□ 12-bit SAR ADC: single-ended four

channels

■ Direct code execution from the external serial

flash memory (XIP)

□ Provides dynamic auto switching function

■ Supports various interfaces

□ eMMC/SD expanded memory

□ SDIO Host/Slave function

□ QSPI for external flash control

□ Three UARTs

□ SPI Master/Slave interface

□ I2C Master/Slave interface

□ I2S for digital audio streaming

□ 4-channel PWM

□ Individually programmable, multiplexed

GPIO pins

□ JTAG and SWD

■ Wi-Fi Alliance certifications:

□ Wi-Fi CERTIFIED? b, g, n

□ WPA? - Enterprise, Personal

□ WPA2? - Enterprise, Personal

□ WPA3? - Enterprise, Personal

□ Wi-Fi Direct

□ Wi-Fi Enhanced Open?

□ WMM

□ WMM - Power Save

□ Wi-Fi Protected Setup?

■ CPU core subsystem

□ Arm? Cortex?-M4F core w/ clock

frequency of 30~160 MHz

□ ROM: 256 kB

■ Hardware accelerators

□ General HW CRC engine

□ HW zeroing function for fast booting

□ Pseudo random number generator

(PRNG)

■ Complete software stack

□ Comprehensive networking software stack

□ Provides TCP/IP stack: in the form of

network socket APIs

■ Advanced security

□ Secure booting

□ Secure debugging using JTAG/SWD and

UART ports

□ Secure asset storage

■ Built-in hardware crypto engines for advanced

security

□ TLS/DTLS security protocol functions

□ Crypto engine for key deliberate generic

security functions: AES (128,192,256),

DES/3DES, SHA1/224/256, RSA, DH,

ECC, CHACHA, and TRNG

□ SRAM: 512 kB

□ OTP: 2 kB

□ Retention Memory: 48 kB

■ Power management unit

□ On-Chip RTC

□ Wake-up control of fast booting or full

booting with minimal initialization time

□ Integrated DC-DC and LDOs

□ Supports three ultra-low power Sleep

modes

■ Clock source

□ 40 MHz crystal (± 20 ppm) for master

clock (initial + temp + aging)

□ 32.768 kHz crystal (± 250 ppm) for RTC

clock

□ Integrated 32 kHz RC oscillator

■ Supply

□ Single operating voltage: 2.1 V to 3.6 V

(typical: 3.3 V)

□ Digital I/O Supply Voltage: 1.8 V / 3.3 V

□ Black-out and brown-out detector

■ Package type

□ 6 mm × 6 mm, 0.4 mm pitch, 48-Pin, QFN

□ 3.8 mm × 3.8 mm, 0.4 mm pitch, 72-Pin,

fcCSP

■ Operating temperature range

□ -40 °C to 85 °C