DA9318M-07UF2中文資料瑞薩數(shù)據(jù)手冊PDF規(guī)格書

General Description

DA9318L/M is a direct charger using a high-efficiency current doubler with integrated Analog to Digital Converter (ADC) for system monitoring. The device is especially optimized to handle high charging currents and at the same time ensure the safety of the battery and the system. It operates together with a main charger, which handles the pre-charge and constant voltage charging duties.

The current doubling is achieved with a high-efficiency capacitive divider that provides an output voltage of VIN/2, which allows the use of standard Type-C? cables for charging currents up to 6 A.

The peak efficiency of DA9318L/M is 98 . Available as two variants, the DA9318L provides a maximum 8 A charging current and 35 W of charging power, whereas DA9318M provides 10 A output current and 44 W of charging power.

An integrated reverse protection feature blocks current flow in both directions while the device is not operational. Additionally, the battery is protected by DA9318L/M by six hardware based safety functions for any over- or under-voltage condition. All safety triggered events lead to an automatic shutdown and are reported via interrupt to the system.

DA9318L/M features an 8-bit ADC for input and output current and voltage, and junction temperature monitoring which ensures safety during direct charging. For software supervision a programmable watchdog timer, and for battery overload protection a safety timer, are included.

An I2C compatible 2-wire interface is provided for the device control.

The DA9318L/M is available in a small WLCSP 3.62 mm × 3.78 mm package.

Key Features

■ 8 A output current (DA9318L)

■ 10 A output current (DA9318M)

■ 98 efficiency at 2 A

■ 5 current sense accuracy (DA9318L)

■ 10 current sense accuracy (DA9318M)

■ Reverse and forward current protection in

IDLE mode

■ I2C compatible 2-wire interface

■ 8-bit ADC to measure voltage and current at

the input and output as well as junction

temperature

■ Safety timer and watchdog

■ Automatic shutdown in fault condition

■ Travel adaptor detection

■ No inductors

■ WLCSP package: 3.62 mm × 3.78 mm

Applications

■ Direct charging in smartphones and tablets, battery packs, and Li-ion powered devices