DLMUBNAAN工業自動化與控制的監控器-繼電器輸出規格書PDF中文資料

Description

The DLMU Series is a universal voltage, 3-phase voltage

monitor. It continuously measures the voltage of each of the

three phases with microcontroller accuracy and compares the

value to preset trip points. It separately senses phase reversal

and loss; over, under and unbalanced voltages; and over or

under frequency. Protection is assured during periods of large

average voltage fluctuations or when regenerated voltages

are present. The unit trips within 200ms when phase loss

is detected. Adjustable time delays are included to prevent

nuisance tripping and short cycling of sensitive equipment.

The isolated, 10A, SPDT and 2A alarm output relay contacts

trip when a phase voltage exceeds the trip limits for the trip

delay. Nominal line voltage, voltage unbalance, and time

delays are knob adjustable. The phase loss setpoint and the

acceptable frequency range are fixed. Both delta and wye

systems can be monitored; no connection to neutral is required.

Operation

Upon application of line voltage, the output is de-energized

and the restart delay begins. If all the 3-phase voltages are

within the acceptable range, the output energizes at the end

of the restart delay. The microcontroller circuitry automatically

senses the voltage range, and selects the correct operating

frequency (50 or 60Hz). The over and undervoltage trip points

are set automatically. When the measured value of any phase

voltage exceeds the acceptable range limits (lower or upper)

the trip delay begins. At the end of the trip delay the output

relay de-energizes. If the phase voltage returns to an acceptable

value before the trip delay expires, the trip delay is reset and the

output remains energized. Under, over, and unbalanced voltages

plus over or under frequency must be sensed for the complete

trip delay before the unit trips. The unit trips in 200ms when

phase loss or reversal are sensed. The unit will not energize if a

fault is sensed as the line voltage is applied.

Reset: Reset is automatic upon correction of the voltage or

frequency fault or phase sequence.

FEATURES BENEFITS

Proprietary

microcontroller

based circuitry

Constant monitoring to protect against phase loss,

phase reversal, over voltage, under voltage,

unbalance, short cycling and over/under frequency

Universal line

voltage range

Flexibility to work in 200 to 480VAC or 500 to

600VAC applications

DIN rail (35mm) or

surface mounting Installation flexibility

LED indication Provides diagnostics of relay, fault and time

delay status

User adjustable

time delays

Prevents nuisance tripping and short cycling of

sensitive equipment