DM9162中文資料聯杰數據手冊PDF規格書

General Description

DAVICOM’s DM9162 is a physical layer, low power, and single-chip 10BASE-T/100BASE-TX

transceiver specifically designed for consumer electronics, industrial, and enterprise applications. Through using a CMOS process, the DM9162 has the advantage of ensuring both high performance and savings in power consumption.

Through utilization of automatic media speed and protocol selection, the auto-negotiation

function is strongly supported in the DM9162. Then due to the built-in wave shaping filter, the

DM9162 has a significant convenience of not requiring an external filter to transport signals to

the media in 10BASE-T or 100BASE-TX during Ethernet operation.

Features

● Fully complies with IEEE 802.3 / IEEE 802.3u 10Base-T/ 100Base-TX, ANSI X3T12 TP-PMD 1995 standards

● Support HP MDI/MDI-X auto crossover function (HP Auto-MDIX)

●Support Auto-Negotiation function, compliant with IEEE 802.3u

● Fully integrated Physical layer transceiver On-chip filtering with direct interface to magnetic transformer

● Selectable repeater or node mode

● Selectable MII or RMII (Reduced MII) mode for 100Base-TX and 10Base-TX. Selectable MII or GPSI (7-Wired) mode for 10Base-T

● RMII with 50MHz clock output

● Selectable full-duplex or half-duplex operation

● MII management interface with mask-able interrupt output capability

● Provide Loopback mode for easy system diagnostics

● LED status outputs indicate Link/ Activity, Speed10/100 and Full-duplex/Collision.

Support Dual-LED optional control

● Single low power Supply of 3.3V with an advanced CMOS technology

●Lower Power consumption modes:

o Power Reduced mode (cable detection)

o Power Down mode

● Compatible with 3.3V and 5.0V tolerant I/Os

● Pin to pin Compatible with DM9161A/B/C

●DSP architecture PHY Transceiver.

●7x7mm 48-pin LQFP/5x5mm 32-pin QFN - 0.162um process