dsPIC33FJ64GS406中文資料微芯科技數(shù)據(jù)手冊(cè)PDF規(guī)格書

DEVICE OVERVIEW

The dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610 families of devices contain extensive Digital Signal Processor (DSP) functionality with a high-performance 16-bit microcontroller (MCU) architecture.

Operating Conditions

? 3.0V to 3.6V, -40oC to +85oC, DC to 50 MIPS

? 3.0V to 3.6V, -40oC to +125oC, DC to 40 MIPS

Core: 16-Bit dsPIC33F

? Code-Efficient (C and Assembly) Architecture

? Two 40-Bit Wide Accumulators

? Single-Cycle (MAC/MPY) with Dual Data Fetch

? Single-Cycle Mixed-Sign MUL plus Hardware Divide

? 32-Bit Multiply Support

Clock Management

? ±1 Internal Oscillator

? Programmable PLLs and Oscillator Clock Sources

? Fail-Safe Clock Monitor (FSCM)

? Independent Watchdog Timer (WDT)

? Fast Wake-up and Start-up

Power Management

? Low-Power Management modes (Sleep, Idle, Doze)

? Integrated Power-on Reset and Brown-out Reset

? 1.7 mA/MHz Dynamic Current (typical)

? 50 μA IPD Current (typical)

High-Speed PWM

? Up to 9 PWM Pairs with Independent Timing

? Dead Time for Rising and Falling Edges

? 1.04 ns PWM Resolution

? PWM Support for:

- DC/DC, AC/DC, Inverters, PFC, Lighting

- BLDC, PMSM, ACIM, SRM

? Programmable Fault Inputs

? Flexible Trigger Configurations for ADC Conversions

Advanced Analog Features

? High-Speed ADC module:

- 10-bit resolution with up to two Successive Approximation Register (SAR) converters (up to 4 Msps)

- Up to 24 input channels grouped into 12 conversion pairs plus two voltage reference monitoring inputs

- Dedicated result buffer for each analog channel

? Flexible and Independent ADC Trigger Sources

? Up to 4 High-Speed Comparators with Direct Connection to the PWM module:

- 10-bit Digital-to-Analog Converter (DAC) for each comparator

- DAC reference output

- Programmable references with 1024 voltage points

Timers/Output Compare/Input Capture

? Six General Purpose Timers:

- Five 16-bit and up to two 32-bit timers/counters

? Four Output Compare (OC) modules Configurable as Timers/Counters

? Quadrature Encoder Interface (QEI) module Configurable as Timer/Counter

? Four Input Capture (IC) modules

Communication Interfaces

? Two UART modules (12.5 Mbps):

- With support for LIN/J2602 2.0 protocols and IrDA?

? Two 4-wire SPI modules (15 Mbps)

? ECAN? module (1 Mbaud) CAN 2.0B Support

? Two I2C? modules (up to 1 Mbaud) with SMBus Support

Direct Memory Access (DMA)

? 4-Channel DMA with User-Selectable Priority Arbitration

? UART, SPI, ECAN?, IC, OC and Timers

Input/Output

? Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or 6 mA on 66 Pins

? 5V Tolerant Pins

? Selectable Open-Drain and Pull-ups

? 29 External Interrupts

Qualification and Class B Support

? AEC-Q100 REVG (Grade 1 -40oC to +125oC)

? Class B Safety Library, IEC 60730, VDE Certified

Debugger Development Support

? In-Circuit and In-Application Programming

? Two Program and two Complex Data Breakpoints

? IEEE 1149.2 Compatible (JTAG) Boundary Scan

? Trace and Run-Time Watch