The EL9111 and EL9112 are triple channel differential

receivers and equalizers. They contains three high speed

differential receivers with five programmable poles. The

outputs of these pole blocks are then summed into an output

buffer. The equalization length is set with the voltage on a

single pin. Using the Enable pin on the EL9111 and EL9112,

the outputs can be placed into a high impedance state

enabling multiple devices to be connected in parallel and

used in a multiplexing application.

The gain can be adjusted up or down on each channel by 6dB

using its VGAIN control signal. In addition, a further 6dB of gain

can be switched in to provide a matched drive into a cable.

The EL9111 and EL9112 have a bandwidth of 150MHz and

consume just 108mA on ±5V supply. A single input voltage is

used to set the compensation levels for the required length

of cable.

The EL9111 is a special version of the EL9112 that decodes

syncs encoded onto the common modes of three pairs of

CAT-5 cable by the EL4543. (Refer to the EL4543 datasheet

for details.)

The EL9111 and EL9112 are available in a 28 Ld QFN

package and are specified for operation over the full -40°C to

+85°C temperature range.

Features

? 150MHz -3dB bandwidth

? CAT-5 compensation

- 50MHz @ 1000 ft

- 125MHz @ 500 ft

? 108mA supply current

? Differential input range 3.2V

? Common mode input range -4V to +3.5V

? ±5V supply

? Output to within 1.5V of supplies

? Available in 28 Ld QFN package

? Pb-free plus anneal available (RoHS compliant)

EL9112屬于集成電路（IC） > 驅動器，接收器，收發器。瑞薩科技有限公司制造生產的EL9112驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。