EVAL-ADN4621EBZ開發板套件編程器的評估演示板及套件規格書PDF中文資料

EVAL-ADN4621EBZ屬于開發板套件編程器的評估演示板及套件。由亞德諾半導體技術有限公司制造生產的EVAL-ADN4621EBZ評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。

GENERAL DESCRIPTION

The ADN4620/ADN46211 are dual-channel, signal isolated, low

voltage differential signaling (LVDS) buffers that operate at up to

2.5 Gbps with very low jitter. The devices integrate Analog Devices,

Inc., iCoupler? technology, enhanced for high speed operation

to provide drop-in galvanic isolation of LVDS signal chains. AC

coupling and/or level shifting to the LVDS receivers and from the

LVDS drivers allows isolation of other high speed signals, such as

current mode logic (CML).

The ADN4620/ADN4621 include a refresh mechanism to monitor

the input and output states and ensure that they remain the same

in the absence of data transitions (for example, at power-on). For

lower power consumption and high speed operation with low jitter,

the isolator circuits rely on 1.8 V supplies, while 3.3 V supplies are

used for LVDS receivers to support the full common-mode range

with an input voltage range (input common mode plus differential

input voltage) of 0 V to 2.4 V per Table 2.

The devices are fully specified over a wide industrial temperature

range and are available in a compact SSOP package with 5.3 mm

creepage (for reinforced insulation at ac mains voltages).

FEATURES

? 3.75 kV rms LVDS isolators

? Complies with TIA/EIA-644-A LVDS signal levels

? Dual-channel configuration (ADN4620: 2 + 0, ADN4621: 1 + 1)

? Any data rate up to 2.5 Gbps switching with low jitter

? 5 Gbps total bandwidth across two channels

? 2.15 ns typical propagation delay

? Typical jitter: 0.82 ps rms random, 40 ps total peak-to-peak

? Lower power 1.8 V supplies with 3.3 V supplies for I/O

? ±7 kV IEC 61000-4-2 ESD protection across isolation barrier

? High common-mode transient immunity: 70 kV/μs typical

? Safety and regulatory approvals (20-lead SSOP package)

? UL (pending): 3750 V rms for 1 minute per UL 1577

? CSA Component Acceptance Notice 5A (pending)

? VDE certificate of conformity, reinforced insulation (pending)

? DIN V VDE V 0884-11 (VDE V 0884-11):2017-01

? VIORM = 1500 VPEAK (maximum working insulation voltage)

? Enable or disable refresh (low speed output correctness check)

? Operating temperature range: ?40°C to +125°C

? Compact SSOP package with 5.3 mm creepage

APPLICATIONS

? Analog front-end isolation

? Data plane isolation

? Isolated high speed clock and data links

? Multigigabit serialization/deserialization (SERDES)

? PCB-to-PCB optical replacement (for example, short reach fiber)