FAN4800CUN集成電路（IC）的PFC（功率因數校正）規格書PDF中文資料

FAN4800CUN屬于集成電路（IC）的PFC（功率因數校正）。由安森美半導體公司制造生產的FAN4800CUNPFC（功率因數校正）功率因數校正 (PFC) 是用于調整交流電路中的電壓和電流之間的相位角，使之趨近于零的半導體器件。不同模式包括平均電流、邊界導通、連續導通、臨界導通、電流控制式頻率折返、不連續和不連續導通，開關頻率從 6 kHz 至 1.7 MHz 可調。

Features

? Pin-to-Pin Compatible with ML4800, FAN4800,

CM6800, and CM6800A

? PWM Configurable for Current-Mode or

Feed-Forward Voltage-Mode Operation

? Internally Synchronized Leading-Edge PFC and

Trailing-Edge PWM in One IC

? Low Operating Current

? Innovative Switching-Charge Multiplier Divider

? Average-Current-Mode for Input-Current Shaping

? PFC Over-Voltage and Under-Voltage Protections

? PFC Feedback Open-Loop Protection

? Cycle-by-Cycle Current Limiting for PFC/PWM

? Power-on Sequence Control and Soft-Start

? Line Sagging Protection

? fRTCT=4?fPFC=4?fPWM for FAN4800AU

? fRTCT=4?fPFC=2?fPWM for FAN4800CU

Applications

? Desktop PC Power Supply

? Internet Server Power Supply

? LCD TV/ Monitor Power Supply

? UPS

? Battery Charger

? DC Motor Power Supply

? Monitor Power Supply

? Telecom System Power Supply

? Distributed Power

Related Resources

? AN-8027 — FAN480X PFC+PWM Combination

Controller Application

Description

The highly integrated FAN4800AU/CU parts are

specially designed for power supplies that consist of

boost PFC and PWM. They require very few external

components to achieve versatile protections and

compensation. They are available in 16-pin DIP and

SOP packages.

The PWM can be used in current or Voltage Mode. In

Voltage Mode, feed-forward from the PFC output bus

can reduce secondary output ripple.

To evaluate FAN4800AU/CU for replacing existing

FAN4800A/C, FAN4800AS/CS, old version FAN4800

and ML4800 boards, six things must be completed

before the fine-tuning procedure:

1. Change RAC resistor from the old value to a higher

resistor value: 6 M? to 8 M?.

2. Change RT/CT pin from the existing values to

RT=6.8 k? and CT=1000 pF to have fPFC=64 kHz

and fPWM=64 kHz.

3. The VRMS pin needs to be 1.224 V at VIN=85 VAC

for universal input application with line input from

85 VAC to 270 VAC.

4. Change ISENSE pin filter from the exiting values to

RFilter=51 ? and CFilter=0.01 μF for higher bandwidth.

5. At full load, the average VVEA must be ~4.5 V and

ripple on VVEA needs to be less than 400 mV.

6. For the SS pin, the soft-start current has been

reduced to half the FAN4800 capacitor.

There are two differences from FAN4800AS/CS to

FAN4800AU/CU:

? Add Line Sagging Protection

? Fix Inductance Current Instability during AC Cycle

Drop Test