FAN7389MX1集成電路（IC）的柵極驅動器規格書PDF中文資料

FAN7389MX1屬于集成電路（IC）的柵極驅動器。由安森美半導體公司制造生產的FAN7389MX1柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。

Features

? Floating Channel for Bootstrap Operation to +600 V

? Typically 350 mA/650 mA Sourcing/Sinking Current

Driving Capability for All Channels

? Extended Allowable Negative VS Swing to -9.8 V for

Signal Propagation at VDD=VBS=15 V

? Output In-Phase with Input Signal

? Over-Current Shutdown Turns off All Six Drivers

? Matched Propagation Delay for All Channels

? 3.3 V and 5.0 V Input Logic Compatible

? Adjustable Fault-Clear Timing

? Built-in Advanced Input Filter

? Built-in Shoot-Through Prevention Logic

? Built-in Soft Turn-Off Function

? Common-Mode dv/dt Noise Canceling Circuit

? Built-in UVLO Functions for All Channels

Applications

? 3-Phase Motor Inverter Driver

? Air Conditioners

? Washing Machines

? General-Purpose Three-Phase Inverters

Description

The FAN7389 is a monolithic three-phase half-bridge

gate-drive IC designed for high-voltage, high-speed

driving MOSFETs and IGBTs operating up to +600 V.

Fairchild’s high-voltage process and common-mode

noise canceling technique provide stable operation of

high-side drivers under high-dv/dt noise circumstances.

An advanced level-shift circuit allows high-side gate

driver operation up to VS = -9.8 V (typical) for VBS =15 V.

The protection functions include under-voltage lockout

and inverter over-current trip with an automatic faultclear

function.

Over-current protection that terminates all six outputs

can be derived from an external current-sense resistor.

An open-drain fault signal is provided to indicate that an

over-current or under-voltage shutdown has occurred.

The UVLO circuits prevent malfunction when VDD and

VBS are lower than the specified threshold voltage.

Output drivers typically source and sink 350 mA and

650 mA, respectively; which is suitable for three-phase

half-bridge applications in motor drive systems.