FH69-10S-0.5SH中文資料廣瀨數據手冊PDF規格書

Features

1. Industry' s first top and

bottom 2- point contact

design prevents dust

intrusion.

The top and bottom two- point contacts with

springs prevent dust intrusion and enhance

contact reliability.

2. Greater Design Flexibility

Can be used with both top and bottom contacts

for enhanced product design.

Additionally, FH69' s back flip design greatly

increases the FPC/ FFC retention force in the

vertical direction.

3. Improved Workability

Even with the back- flip design, FH69 has a wide

mating port like existing front- flip types for easy

FPC/ FFC insertion. Additionally, since the product

is delivered with the actuator open, mating is

completed in the two simple steps of 1. FPC/ FFC

insertion, and 2. Closing the actuator.

4. FPC/ FFC Mis- mating

detection

Can detect mis- mating after FPC/ FFC insertion by

checking the location of the FPC/ FFC tabs.

5. Reduced switching time

Compatible with the FPC/ FFC and land pattern of

0. 5mm pitch standard products FH28/ FH28K/

FH52K/ FH52T/ FH75 for easy replacement when

top contact or vertical routing are required.

* Consult a Hirose representative about competitor

products.

6. 125℃ Heat Resistance

Ideal for applications requiring 125℃ heat

resistance

* When using FFC the heat resistance is up to 105℃. When the heat

resistance of the FPC/ FFC is less than 125 ℃ for FPC and 105℃

ｆor FFC, the heat resistance of the FPC/ FFC is applicable.

7. Passes Strict Automotive

Testing Requirements

FH69 passes rigorous tests for various

automotive applications.

( Ex. : Temperature Cycle)

Temperature : - 55 → + 15 to + 35 → + 125

→ + 1 5 t o 3 5℃

Time : 30 → 2 to 3 → 30 → 2 to 3min.

1000 cycles repeated under the above conditions

8. Halogen- Free

No chlorine or bromine exceeding the standard

value is used in the connector.

* As defined by IEC61249- 2- 21

Br- 900ppm maximum, Cl- 900ppm maximum,

Cl + Br combined- 1, 500ppm maximum