GL824-MZGXX中文資料創(chuàng)惟科技數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The GL824/824C USB On-The-Go (OTG) Dual-Role-Device controller which include Milti-I/F and ATA/ATAPI interface is a highly integral microprocessor, which optimized and specially designed for embedded system, portable device, multi-function peripheral and consumer products with External uP interface, SSI, I2C and Flash cards interface.Using the GL824, developers can create OTG-compliant dual-role products capable of point-to-point communication. Its focus on power efficiency makes the GL824 ideal for set top box, DVD player, PDA, PMP, Digital TV and home entertainment with USB OTG and Flash card reader.

FEATURES

· USB OTG Controller

- Compliant with USB speci fication Rev . 2.0 at high-speed and full-speed data transfer rate

- Compliant with On-The-Go (OTG) supplement Rev . 1.0

- Complies with USB Storage Class specification rev. 1.0

- Support Suspend, Resume, HNP and SRP

- External source to drive Vbus signal

- Supports1 device address and up to4 endpoints: Control (0)/ Bulk Read (1)/ Bulk Write (2)/Interrupt (3).

· Integrated USB building blocks

- USB2.0 transceiver macro (UTM), Serial Interface Engine (SIE), Build-in power-on reset (POR) and low-voltage detector (LVD)

· Embedded 8051 micro-controller

- Operate @ 60 MHz clock, 1 clocks per instruction cycle

- Embedded 64K*2 Byte reprogrammable flash memory and internal 256 byte SRAM

- Embedded 8K Byte external SRAM

· Support power saving mode

· Support firmware upgrade via USB and external serial flash memory

· On-Chip power MOSFETs for supplying flash media card power except Compact Flash. (GL824 only)

· Interface

- Support external SDRAM interface (option)

- Support 16bit host interface (Support external uP Read/Write Status/Command and Read/Write FIFO) (option)

- Supports A TA/A TAPI interface

- Support serial MP3 decoder interface

- Support serial LCD Panel interface

- Support memory cards interface

- Support SSI interface for master and slave mode up to 15MHz

- Support I2C interface

- Support UAR T interface

· ATA/ATAPI interface

- Complies with ATA/ATAPI-6 specification rev 1.0

- Support 16-bit Multiword DMA mode and Ultra DMA mode interface (Ultra 33/66)

· CompactFlashTM interface ( GL824 only )

- Support CFA specification v2.1 / v3.0

- Support True IDE mode

- Support 8 / 16 bit data mode and different timing