HA9P5320-5Z中文資料Intersil數據手冊PDF規格書

The HA-5320 was designed for use in precision, high speed

data acquisition systems.

The circuit consists of an input transconductance amplifier

capable of providing large amounts of charging current, a

low leakage analog switch, and an output integrating

amplifier. The analog switch sees virtual ground as its load;

therefore, charge injection on the hold capacitor is constant

over the entire input/output voltage range. The pedestal

voltage resulting from this charge injection can be adjusted

to zero by use of the offset adjust inputs. The device

includes a hold capacitor. However, if improved droop rate is

required at the expense of acquisition time, additional hold

capacitance may be added externally.

This monolithic device is manufactured using the Intersil

Dielectric Isolation Process, minimizing stray capacitance

and eliminating SCRs. This allows higher speed and latchfree operation. For further information, please see

Application Note AN538.

Features

? Gain, DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 106 V/V

? Acquisition Time. . . . . . . . . . . . . . . . . . . . . .1.0μs (0.01)

? Droop Rate. . . . . . . . . . . . . . . . . . . . . 0.08μV/μs (+25°C)

17μV/μs (Full Temperature)

? Aperture Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25ns

? Hold Step Error (See Glossary) . . . . . . . . . . . . . . . . . 5mV

? Internal Hold Capacitor

? Fully Differential Input

? TTL Compatible

? Pb-Free Available (RoHS Compliant)

Applications

? Precision Data Acquisition Systems

? Digital to Analog Converter Deglitcher

? Auto Zero Circuits

? Peak Detector