The HD-6408 is a CMOS/LSI Manchester Encoder/Decoder

for creating a very high speed asynchronous serial data bus.

The Encoder converts serial NRZ data (typically from a shift

register) to Manchester II encoded data, adding a sync pulse

and parity bit. The Decoder recognizes this sync pulse and

identifies it as a Command Sync or a Data Sync. The data is

then decoded and shifted out in NRZ code (typically into a

shift register). Finally, the parity bit is checked. If there were

no Manchester or parity errors the Decoder responds with a

valid word signal. The Decoder puts the Manchester code to

full use to provide clock recovery and excellent noise

immunity at these very high speeds.

The HD-6408 can be used in many commercial applications

such as security systems, environmental control systems,

serial data links and many others. It utilizes a single 12 x

clock and achieves data rates of up to one million bits per

second with a very minimum overhead of only 4 bits out of

20, leaving 16 bits for data.

Features

? Low Bit Error Rate

? Data Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1MBit/s

? Sync Identification and Lock-In

? Clock Recovery

? Manchester II Encoder, Decoder

? Separate Encode and Decode

? Low Operating Power. . . . . . . . . . . . . . . . . . . 50mW at 5V

? Single Power Supply

? 24 Ld Package

? Pb-Free Plus Anneal Available (RoHS Compliant)