HD74ALVCH162500中文資料日立數(shù)據(jù)手冊(cè)PDF規(guī)格書

Description

Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A to B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A bus data is stored in the latch flip flop on the high to low transition of CLKAB. Output enable OEAB is active high. When OEAB is high, the B port outputs are active. When OEAB is low, the B port outputs are in the high impedance state. Data flow for B to A is similar to that of A to B but uses OEBA, LEBA, and CLKBA. The output enables are complementary (OEAB is active high, and OEBA is active low). Active bus hold circuitry is provided to hold unused or floating data inputs at a valid logic level. All outputs, which are designed to sink up to 12 mA, include 26 ? resistors to reduce overshoot and undershoot.

Features

? VCC = 2.3 V to 3.6 V

? Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)

? Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)

? High output current ±12 mA (@VCC = 3.0 V)

? Bus hold on data inputs eliminates the need for external pullup / pulldown resistors

? All outputs have equivalent 26 ? series resistors, so no external resistors are required.