HDD16M64B8-10A中文資料HANBIT數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The HDD16M64B8 is a 16M x 64 bit Double Data Rate(DDR) Synchronous Dynamic RAM high-density memory module. The module consists of eight CMOS 16M x 8 bit with 4banks DDR SDRAMs in 66pin TSOP-II 400mil packages and 2K EEPROM in 8-pin TSSOP package on a 200-pin glass-epoxy. Four 0.1uF decoupling capacitors are mounted on the printed circuit board in parallel for each DDR SDRAM.

FEATURES

? Part Identification

HDD16M64B8 – 10A : 100MHz (CL=2)

HDD16M64B8 – 13A : 133MHz (CL=2)

HDD16M64B8 – 13B : 133MHz (CL=2.5)

? 128MB(16Mx64) Unbuffered DDR SO-DIMM based on 16Mx8 DDR SDRSM

? 2.5V ± 0.2V VDD and VDDQ power supply

? Auto & self refresh capability (4096 Cycles/64ms)

? All input and output are compatible with SSTL_2 interface

? Data(DQ), Data strobes and write masks latched on the rising and falling edges of the clock

? All Addresses and control inputs except Data(DQ), Data strobes and Data masks latched on the rising edges of the clock

? MRS cycle with address key programs

- Latency (Access from column address) : 2, 2.5

- Burst length : 2, 4, 8

- Data scramble : Sequential & Interleave

? Data(DQ), Data strobes and write masks latched on the rising and falling edges of the clock

? All Addresses and control inputs except Data(DQ), Data strobes and Data masks latched on the rising edges of the clock

? The used device is 4M x 8bit x 4Banks DDR SDRAM