The HIP5600 is an adjustable 3-terminal positive linear voltage regulator capable of operating up to either 400VDC or 280VRMS. The output voltage is adjustable from 1.2VDC to within 50V of the peak input voltage with two external resistors. This high voltage linear regulator is capable of sourcing 1mA to 30mA with proper heat sinking. The HIP5600 can also provide 40mA peak (typical) for short periods of time.

Protection is provided by the on chip thermal shutdown and output current limiting circuitry. The HIP5600 has a unique advantage over other high voltage linear regulators due to its ability to withstand input to output voltages as high as 400V(peak), a condition that could exist under output short circuit conditions.

Common linear regulator configurations can be implemented as well as AC/DC conversion and start-up circuits for switch mode power supplies.

Features

? Operates from 50VDC to 400VDC

? Operates from 50VRMS to 280VRMS Line

? UL Recognized

? Variable DC Output Voltage 1.2VDC to VIN - 50V

? Internal Thermal Shutdown Protection

? Internal Over Current Protection

? Up to 40mA Peak Output Current

? Surge Rated to ±650V; Meets IEEE/ANSI C62.41.1980 with Additional MOV

CAUTION: This product does not provide isolation from AC line.

Applications

? Switch Mode Power Supply Start-Up

? Electronically Commutated Motor Housekeeping Supply

? Power Supply for Simple Industrial/Commercial/Consumer Equipment Controls

? Off-Line (Buck) Switch Mode Power Supply