HLK-10D2412B中文資料AGELECTRONICA數(shù)據(jù)手冊PDF規(guī)格書

PRODUCT FEATURES

? Ultra-thin small size standard package and standard pins

? Wide range input voltage: 18~36VDC

? Low power consumption, environmental protection, standby power consumption is only 0.3W (typical value)

? Input and output isolation withstand voltage 1500VDC

? Ultra-fast startup: 100ms (typical value)

? High efficiency, conversion efficiency up to 86% (Typ)

? Operating temperature range: -40°C~+85°C

? Good output short circuit and over current protection and self-recovery

? High reliability, long life design, continuous work over 100000H

? Potting and sealing with high-quality environmentally friendly waterproof and thermal conductive glue, dustproof, moistureproof, shockproof and flame retardant

? Meet UL/CE/EMC and safety testing requirements

? Can be used in medical, industrial control, electric power, instrumentation, communication, railway and other fields

APPLICATION CIRCUIT

Recommended test circuit

Generally recommended capacitance: C1: 47-100μF; C2, C3: 10-22μF.

All DC/DC converters of this series are tested according to the recommended test circuit shown in the figure below before leaving the factory.

If it is required to further reduce the input and output ripple, the input and output external capacitors C1, C2, C3 can be increased or selected in series with capacitors with a small equivalent impedance, but the capacitance cannot be greater than the maximum capacitive load of the product.

Pin description:

1: -Vin input negative; 2: +Vin input positive; 3: +Vo output positive; 4: NC; 5: -Vo output negative; 6: NC

*Note: If the definition of each pin of the power module does not match the selection manual, the label on the physical label shall prevail.