Description

The HSSR-8060 consists of a high-voltage circuit, optically coupled with a light emitting diode (LED). This device is a solid-state replacement for single-pole, normally-open (1 Form A) electromechanical relays used for general purpose switching of signals and low-power loads. The relay turns on (contact closes) with a minimum input current, IF, of 5 mA through the input LED,

Features

? Compact Solid-State Bidirectional Switch

? Normally-Off Single-Pole Relay Function (1 Form A)

? 60 V Output Withstand Voltage in Both Polarities at 25°C

? 0.75/1.5 Amp Current Ratings (See Schematic for Connections A & B)

? Low Input Current; CMOS Compatibility

? Very Low On-resistance: 0.4 ? Typical at 25°C

? ac/dc Signal and Power Switching

? Input-to-Output Momentary Withstand Insulation Voltage: 2500 Vac, 1 Minute

? 16-kV ESD Immunity: MIL-STD-883, Method 3015

? IEEE Surge Withstand Capability (IEEE STD 472-1974)

? CSA Approved

? UL 508 Approved

Applications

? Programmable Logic Controllers

? Telecommunication Switching Equipment

? Reed Relay Replacement

? 28 Vdc, 24 Vac, 48 Vdc Load Driver

? Industrial Relay Coil Driver