ICL7135CN集成電路（IC）的ADC/DAC-特殊用途規格書PDF中文資料

ICL7135CN屬于集成電路（IC）的ADC/DAC-特殊用途。由德州儀器制造生產的ICL7135CNADC/DAC - 特殊用途該產品族中的產品可用于模擬和數字表示的信息轉換，適用于特定用例，或集成了通用數據轉換器中不常見的其他功能。例如針對超聲或汽車?yán)走_(dá)應用集成了低噪聲放大器和可變?cè)鲆婕?jí)的器件、注重音頻和視頻的產品、在段碼式顯示器上集成顯示測量值功能的器件、集成輸入輸出電氣隔離的器件等。

DESCRIPTION

The ICL7135C and TLC7135C converters are manufactured with Texas Instruments highly efficient CMOS

technology. These 4 1/2-digit, dual-slope-integrating, analog-to-digital converters (ADCs) are designed to

provide interfaces to both a microprocessor and a visual display. The digit-drive outputs D1 through D4 and

multiplexed binary-coded-decimal outputs B1, B2, B4, and B8 provide an interface for LED or LCD

decoder/drivers as well as microprocessors.

The ICL7135C and TLC7135C offer 50-ppm (one part in 20,000) resolution with a maximum linearity error of

one count. The zero error is less than 10 μV and zero drift is less than 0.5 μV/°C. Source-impedance errors are

minimized by low input current (less than 10 pA). Rollover error is limited to ±1 count.

The BUSY, STROBE, RUN/HOLD, OVER RANGE, and UNDER RANGE control signals support

microprocessor-based measurement systems. The control signals also can support remote data acquisition

systems with data transfer through universal asynchronous receiver transmitters (UARTs).

The ICL7135C and TLC7135C are characterized for operation from 0°C to 70°C.

Zero Reading for 0-V Input

Precision Null Detection With True Polarity

at Zero

1-pA Typical Input Current

True Differential Input

Multiplexed Binary-Coded-Decimal (BCD)

Output

Low Rollover Error: ±1 Count Max

Control Signals Allow Interfacing With

UARTs or Microprocessors

Autoranging Capability With Over-and

Under-Range Signals

TTL-Compatible Outputs

Second Source to Teledyne TSC7135,

Intersil ICL7135, Maxim ICL7135, and

Siliconix Si7135

CMOS Technology