ICS1893CY-10中文資料ICST數(shù)據(jù)手冊(cè)PDF規(guī)格書

General

The ICS1893CY-10 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards. The ICS1893CY-10 supports managed or unmanaged node, repeater, and switch applications.

Features

? Supports category 5 cables with attenuation in excess of 24 dB at 100 MHz

? Fully integrated, DSP-based PMD includes:

– Adaptive equalization and baseline wander correction

– Transmit wave shaping and stream cipher scrambler

– MLT-3 encoder and NRZ/NRZI encoder

? Low-power, 0.35-micron CMOS (typically 400 mW)

? Power-down mode typically 21mW

? Single 3.3-V power supply.

? Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sublayers of IEEE standard

? 10Base-T and 100Base-TX IEEE 802.3 compliant

? Highly configurable design supports:

– Node, repeater, and switch applications

– Managed and unmanaged applications

– 10M or 100M half- and full-duplex modes

– Parallel detection

– Auto-negotiation, with Next Page capabilities

– Auto-MDI/MDIX crossover correction

? MAC/Repeater Interface can be configured as:

– 10M or 100M Media Independent Interface

– 100M Symbol Interface (bypasses the PCS)

– 10M 7-wire Serial Interface

? Clock and crystal supported

? Small Footprint 64-pin Thin Quad Flat Pack (TQFP)

? Available in Industrial Temperature and Lead-Free