IES-2320中文資料雷賽智能數(shù)據(jù)手冊PDF規(guī)格書

Features

Easy servo control technology to combine advantages of open-loop stepper systems and brushless

servo systems

Closed-loop controls to eliminate lose of steps, stall or movement synchronization

Integrated compact size for saving mounting space & setup time, and reducing electrical interference

1000-line integrated optical incremental encoder for accurate position control

High starting torque and quick response

Smooth motor movement with no vibration

Excellent respond time, quick acceleration, and very high high-speed torque (30 over open-loop)

Load-dependent dynamic current output from drive to motor to significantly motor heating deduction

Input voltage from 20 to 50 VDC; 6.0A peak current output from drive to motor

2 Nm (285 oz-in) holding torque stepper motor with NEMA 23 frame size installation

16 micro step resolution options via DIP switches; or any value from 200-51,200 (increased by 1) via

software configuration

Isolated control inputs of Pulse, Direction and Enable

No tuning for plug and play setup

In-position and fault outputs to external motion controllers for complete system controls.

Over voltage, over-current, and position-error protection

Descriptions

Leadshine’s iES-2320 integrated easy servo motor is a NEMA 23 stepper motor integrated with a 1,000-line (4,000

PPR) encoder and an easy servo drive. At very compact size and with all components integrated, the iES-2320 can

save mounting space, eliminate encoder connection & motor wiring time, reduce interference, and cut/reduce cable

and labor costs.

By adopting Leadshine’s latest easy servo control technology, the easy servo drive of the iES-2320 can drive the

stepper motor with high staring torque, high precision, smooth movement, and extra low noise at low speed

movement with no obvious resonance area. Different from constant-output-current output from a drive to a stepper

motor in normal open-loop stepper controls, output current of the iES-2320 is dynamic and changes depending on

load condition, same as servo controls. Therefore, it can significantly reduce motor heating and increase motor

lifetime. The drive takes step & direction input commands, and is capable of outputting in-position and fault signals

back to a motion controller or external devices, for complete system controls.