Advanced Single Synchronous Buck Pulse-Width Modulation (PWM) Controller

The ISL6420A simplifies the implementation of a complete control and protection scheme for a high-performance DC/DC buck converter. It is designed to drive N-Channel MOSFETs in a synchronous rectified buck topology. The ISL6420A integrates control, output adjustment, monitoring and protection functions into a single package. Additionally, the IC features an external reference voltage tracking mode for externally referenced buck converter applications and DDR termination supplies, as well as a voltage margining mode for system testing in networking DC/DC converter applications.

Features

? Operates From:

- 4.5V to 5.5V Input

- 5.5V to 28V Input

? 0.6V Internal Reference Voltage

- ±1.0 Reference Accuracy

? Resistor-Selectable Switching Frequency

- 100kHz to 1.4MHz

? Voltage Margining and External Reference Tracking Modes

? Output can Sink or Source Current

? Lossless, Programmable Overcurrent Protection

- Uses Upper MOSFET’s rDS(ON)

? Programmable Soft-Start

? Drives N-Channel MOSFETs

? Simple Single-Loop Control Design

- Voltage-Mode PWM Control

? Fast Transient Response

- High-Bandwidth Error Amplifier

- Full 0 to 100 Duty Cycle

? Extensive Circuit Protection Functions

- PGOOD, Overvoltage, Overcurrent, Shutdown

? Diode Emulation during Startup for Pre-Biased Load Applications

? Offered in 20 Ld QFN and QSOP Packages

? QFN (4x4) Package

- QFN compliant to JEDEC PUB95 MO-220

QFN -Quad Flat No Leads - Product Outline

- QFN Near Chip Scale Package Footprint;

Improves PCB Efficiency, Thinner in Profile

? Pb-Free (RoHS Compliant)

Applications

? Power Supplies for Microprocessors/ASICs

- Embedded Controllers

- DSP and Core Processors

- DDR SDRAM Bus Termination

? Ethernet Routers and Switchers

? High-Power DC/DC Regulators

? Distributed DC/DC Power Architecture

? Personal Computer Peripherals

? Externally Referenced Buck Converters

ISL6420AIAZ屬于集成電路（IC） > PMIC - 穩壓器 - DC DC 開關式控制器。瑞薩科技有限公司制造生產的ISL6420AIAZDC-DC 開關控制器PMIC（電源管理集成電路）DC 到 DC 開關式控制器是用于高效率電路的穩壓 IC，其配置為生成高于（突升或步升）或低于（突降或步降）輸入電源的輸出電源電壓。其他拓撲結構可能包括：降壓-升壓、反激、正激、Cuk、SEPIC、全橋、半橋和推挽式。這些器件不同于需要最小電壓并“燒盡”多余電壓的線性穩壓器。