JM1AN-ZTM-DC48V繼電器的功率繼電器高于2A規(guī)格書PDF中文資料

FEATURES

? Compact, high-capacity, and

resistant to inductive loads

The relay is a compact 16×30.4×26.5 mm

.630×1.197×1.043 inch. It can control an

inductive load (cos? = 0.7) with inrush

current of 70 A and steady state current of

20 A.

? Excellent contact welding resistance

High contact pressure, a forced opening

mechanism, and a forced wiping

mechanism realizes an excellent contact

welding resistance.

? High breakdown voltage and surge

resistant relay

More than 6.4 mm .252 inch maintained

for the insulation distance between contacts

and coil, and the breakdown voltage

between contacts and coil is 5,000 V for 1

minute. In addition, the surge resistance

between contacts and coil is greater than

10,000 V.

? Resistant to external force

An absorber mechanism is used on the

load terminals, giving a large improvement

in characteristics variations caused

by the external force during FASTON

placement/removal.

? Flux resistance mechanism

The terminal area is plugged with resin to

prevent flux seepage during PCB mounting. (TMP type)

? Conforms to the various safety standards

UL, CSA approved.

TüV, VDE under application.

? The line up can support economical

mounting methods.

The relay are equipped with a drive terminal

(coil terminal) on one side for PCBs,

and a load terminal (tab terminal #250) on

the reverse side. The line up includes the

TM type which can be attached directly to

the PCB composing a drive circuit, and

the TMP type which supports economical

wiring. The TMP type can also be directly

attached, and a high capacity load can be

wired to the tab terminal.