首頁>K218A-S-006P-2BT-CXXXX>規格書詳情
K218A-S-006P-2BT-CXXXX中文資料宏發科技數據手冊PDF規格書
K218A-S-006P-2BT-CXXXX規格書詳情
Application Notes
1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply.
2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 50ms minimum to ensure a proper change of state. DO NOT energize both T1 and T3 at the same time on a Dual Coil or energize the coil for longer than 1 minute (damage to the coil could occur).
3. Applying excessive heat to the relay terminals (soldering or welding) can cause damage to the internal structure of the relay and should be avoided.
4. Moving or bending the terminals can cause damage to the internal structure of the relay and should be avoided.
5. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
SHINDENGEN |
589220 |
16余年資質 絕對原盒原盤 更多數量 |
詢價 | ||||
飛利浦 |
23+ |
TO-3P |
5000 |
原裝正品,假一罰十 |
詢價 | ||
TOSHIBA |
24+ |
TO-3P |
6616 |
詢價 | |||
SHINDENGE |
22+ |
TO-3P |
25000 |
只做原裝進口現貨,專注配單 |
詢價 | ||
SHI |
23+ |
TO-3P |
7000 |
詢價 | |||
SHINDENGE |
23+ |
TO-3P |
10000 |
公司只做原裝正品 |
詢價 | ||
TYCO |
專業模塊 |
MODULE |
8513 |
模塊原裝主營-可開原型號增稅票 |
詢價 | ||
SHINDENGEN |
07+ |
TO-3P |
7200 |
一級代理,專注軍工、汽車、醫療、工業、新能源、電力 |
詢價 | ||
SHINDENGE |
TO-3P |
22+ |
6000 |
十年配單,只做原裝 |
詢價 | ||
進口原裝 |
23+ |
TO-247 |
3000 |
全新原裝 |
詢價 |
